The EM 120 are highly productive cutting machines. These machines are best suited for high volume manufacturing
of 2” hoses along with workshop capability for 3” high pressure hoses and 4” industrial hoses.
The new UNIFLEX EM 120 is a hose-cutting machine for hydraulic and industrial hoses with outside diameters up to 135 mm.
The EM 120 is the first fully electric cutting machine. The hose is pre-bent and locked while the blade is moving up through the
hose. Via IPC for Industry 4.0 or IoT, the operator just needs to type in the diameter and the machine sets itself and adapts the
speed via sensor. This results in an optimized flat cut without tearing marks. UNIFLEX recommends the use of the suction and
filter device UVC 100 while using the EM 120.
Longer service life due to higher quality
Quality steel knife
CE compliant
Production SAE R 13 & SAE R 15
Workshop SAE R 13 & SAE R 15 *
SAE R 12
Industry
Max. Outside (mm)
Feed
Noise level (dBA)
Brake motor
Suction connection (mm)
Drive
Hose diameter
Length machine (mm)
Width machine (mm)
Height machine (mm)
Weight (kg)
Table
Extraction unit **
UVC adapter
Extraction unit **
Hose guide 2,000 mm
(UHG 14)
The following products are supplied with the purchase of the product and are included in the price.
Extend this machine at all times with the following accessories:
20.56 MB | 11. January 2023
12.52 MB | 24. October 2022
11.5 MB | 22. September 2022
12.87 MB | 7. June 2022
1.24 MB | 11. November 2022
4.06 MB | 11. November 2022
3.44 MB | 11. November 2022
1.62 MB | 11. November 2022
868.80 KB | 11. November 2022
2.79 MB | 11. November 2022